Name: Friction Stir Welding of High Strength 7XXX Aluminum Alloys By Rajiv S. Mishra (Professor, Department of Materials Science and Engineering, Site Director, NSF IUCRC, University of North Texas, USA)
SKU: 9780128094655
Price: 122.19 AUD
Availability: InStock

Friction Stir Welding of High Strength 7XXX Aluminum Alloys Summary

Friction Stir Welding of High Strength 7XXX Aluminum Alloys by Rajiv S. Mishra (Professor, Department of Materials Science and Engineering, Site Director, NSF IUCRC, University of North Texas, USA)

Friction Stir Welding of High Strength 7XXX Aluminum Alloys is the latest edition in the Friction Stir series and summarizes the research and application of friction stir welding to high strength 7XXX series alloys, exploring the past and current developments in the field. Friction stir welding has demonstrated significant benefits in terms of its potential to reduce cost and increase manufacturing efficiency of industrial products in transportation, particularly the aerospace sector. The 7XXX series aluminum alloys are the premium aluminum alloys used in aerospace. These alloys are typically not weldable by fusion techniques and considerable effort has been expended to develop friction stir welding parameters. Research in this area has shown significant benefit in terms of joint efficiency and fatigue performance as a result of friction stir welding. The book summarizes those results and includes discussion of the potential future directions for further optimization.

About Rajiv S. Mishra (Professor, Department of Materials Science and Engineering, Site Director, NSF IUCRC, University of North Texas, USA)

Rajiv S. Mishra is a professor in the Department of Materials Science and Engineering, and Site Director, NSF IUCRC for Friction Stir Processing, at the University of North Texas. Dr. Mishra's publication record includes 255 papers. Out of these, 10 of his papers have more than 100 citations. He has many 'firsts' in the field of friction stir welding and processing. He co-authored the first review paper (2005), co-edited the first book on the subject (2007), edited/co-edited seven TMS symposium proceedings, and served as guest editor for Viewpoint Set in Scripta Materialia (2008). He also has three patents in this field. He published the first paper on friction stir processing (2000) as a microstructural modification tool. Mageshwari Komarasamy is a Post Doctoral Research Associate with the Center for Friction Stir Processing, Department of Materials Science and Engineering, University of North Texas. She has been working on friction stir welding of high strength aluminum alloys and has published a number of papers on high entropy alloys. Her projects have included studies of Double groove friction stir welding and characterization of 7050-T7451 Al alloy; Characterization of 3 inch thick friction stir processed 7050-T7451 Al welds; Friction stir welding and joint efficiency study of Al-Mg-Sc alloys; Friction stir processing of high entropy alloys; Forced mixing of immiscible Cu-Nb-Ag alloy via friction stir processing; and deformation mechanism of Al0.1CoCrFeNi high entropy alloy and its temperature, strain rate and grain size dependence. She has presented at a number of Conferences including the Symposium on High Entropy Alloys II, TMS Annual Meeting 2014 invited presentation; Ultrafine Grained Materials VIII, TMS Annual Meeting 2014; Fatigue in Materials: Fundamentals, Multiscale Modeling and Prevention, TMS Annual Meeting 2014; and ICME: Linking Microstructure to Structural Design Requirements, TMS Annual Meeting 2014.

1. Introduction2. Basic physical metallurgy of 7XXX alloys3. Friction stir welding - Overview4. Temperature distribution5. Microstructural evolution in various zones6. Mechanical properties7. Corrosion8. Physical metallurgy based guidelines for obtaining high joint efficiency9. Summary and future outlook10. References

Additional information

Sku

NLS9780128094655

ISBN 13

9780128094655

ISBN 10

0128094656

Title

Friction Stir Welding of High Strength 7XXX Aluminum Alloys by Rajiv S. Mishra (Professor, Department of Materials Science and Engineering, Site Director, NSF IUCRC, University of North Texas, USA)

Author

Rajiv S. Mishra (Professor, Department of Materials Science and Engineering, Site Director, NSF IUCRC, University of North Texas, USA)

Series

Friction Stir Welding and Processing

Condition

New

Binding type

Paperback

Publisher

Elsevier - Health Sciences Division

Year published

2016-06-13

Number of pages

120

Prizes

N/A

Cover note

Book picture is for illustrative purposes only, actual binding, cover or edition may vary.

Note

This is a new book - be the first to read this copy. With untouched pages and a perfect binding, your brand new copy is ready to be opened for the first time

Friction Stir Welding of High Strength 7XXX Aluminum Alloys Rajiv S. Mishra (Professor, Department of Materials Science and Engineering, Site Director, NSF IUCRC, University of North Texas, USA)

Friction Stir Welding of High Strength 7XXX Aluminum Alloys by Rajiv S. Mishra (Professor, Department of Materials Science and Engineering, Site Director, NSF IUCRC, University of North Texas, USA)

Friction Stir Welding of High Strength 7XXX Aluminum Alloys Summary

Friction Stir Welding of High Strength 7XXX Aluminum Alloys by Rajiv S. Mishra (Professor, Department of Materials Science and Engineering, Site Director, NSF IUCRC, University of North Texas, USA)

About Rajiv S. Mishra (Professor, Department of Materials Science and Engineering, Site Director, NSF IUCRC, University of North Texas, USA)

Table of Contents

Additional information

Customer Reviews - Friction Stir Welding of High Strength 7XXX Aluminum Alloys